Bienvenue invité ( Connexion | Inscription )
Postal2 |
5 May 2014, 16:12
Message
#1
|
EXTREMEeeeeeeee!!!!!!!!!! Indicatif : TH-41 Messages : 6,152 Inscrit : 6/12/04 Lieu : A coter de dijon LFSD (21) Membre n° 20 |
Yop je suis tombé la dessus et apparement c'est pas mal du tout !
Sa se passe par là ! . MFCD for FC3 - v1.0 Description To run the program a JRE 8 is required. Download it here. This software integrated via export.lua in DCS World. It is dependant on which data is exportable for which aircraft, either case. To use it, just run it once before DCS World, and then launch the simulator afterwards. This is needed (only the first time) BEFORE DCS because the program will insert its lua script. To quit the program, press F12. A contextual menu (right click) is available in the black screen. The software can also be launched with custom parameters, the launch bat contains an example too: -noborders: -useMFD(X): where (X) is the index of the TrustmasterMFCD to use, ex. -useMFD1 or -useMFD2 -xy1920,610: coordinates where to place it at startup -s512: size in pixel of the screen square (buttons excluded) To change the paramters just look into the launch batch file (MFCD_FC3.bar) Page: NAV The green triangle in the center is yor aircraft. The white dashed line points to your current object (waypoint or landing). The three green circles represent the bullseye. A dashed green line always points there. Waypoints are connected with a green line (you must cycle all the waypoints in order for them to appear). Yellow squares represent mark points that you can create in the next pages. Page: WPT note: OSBs are numbered clockwise from the upper left one. note: coordinates are degree and minutes decimal for imperial, and degreed, minutes, seconds for metric. OSB 6: Sets the bullseye to the current waypoint. OSB 7: Creates an offset (mark point) FROM the bullseye. OSB 8: Creates an offset (mark point) from the current waypoint. OSB 9: Creates a mark point given the L/L coordinates. OSB 20: Displays current waypoint number. OSB 18: Displays bearing and range TO the current waypoint. OSB 18: Displays current waypoint Latitude. OSB 17: Displays current waypoint Longitude. OSB 16: Displays current waypoint Altitude. Page: POS note: OSBs are numbered clockwise from the upper left one. note: coordinates are degree and minutes decimal for imperial, and degreed, minutes, seconds for metric. OSB 6: Bullseye bearing and range TO. Clicking here will change the bullssye position by coordinates. OSB 7: Make a mark point in the current position. OSB 8: Heading of the aircraft. OSB 9: Bank of the aircraft. OSB 10: Pitch of the aircraft. OSB 20: Bullseye Latitude. OSB 19: Bullseye Longitude. OSB 18: Current Latitude. OSB 17: Current Longitude. OSB 16: Current Altitude (rotary to switch radar/barometric). Page: ENG Page: STG note: OSBs are numbered clockwise from the upper left one. OSB 20: resets the navigation info, waypoints and markpoints. Bullseye remains unchanged. OSB 18: Change the bullseye giving coordinates. OSB 19: Changes the way bullseye is displayed in the MAP, from/to bearing. OSB 10: Rotary switching for imperial or metric system. Peut être pas mal en complément hélios et avec des fonctions comme le T-link . --------------------
Extrêmmmmmmmmmmmmmmmmmmmmmmmmmeeeeeeeeeeee!!! |
lamule |
7 May 2014, 00:58
Message
#2
|
Caféinoman Indicatif : TH-44 Messages : 1,688 Inscrit : 19/11/08 Lieu : France, lot et garonne, agen, 47 Membre n° 3,203 |
très sympa
une copie plus poussée que LEAVU sur FC2 mais adapté à FC3. en cours de test Ce message a été modifié par lamule - 7 May 2014, 03:20. --------------------
|
Postal2 |
7 May 2014, 08:33
Message
#3
|
EXTREMEeeeeeeee!!!!!!!!!! Indicatif : TH-41 Messages : 6,152 Inscrit : 6/12/04 Lieu : A coter de dijon LFSD (21) Membre n° 20 |
Yop j'ai tester rapidement c'est pas mal !
Je pense qu'il faudrait un condensé comme le ''katze pit'' ou encore le Tlink . Sinon je n'arrive pas à avoir les export il fonctionne mais en mode ''No connection'' . --------------------
Extrêmmmmmmmmmmmmmmmmmmmmmmmmmeeeeeeeeeeee!!! |
Harke |
7 May 2014, 09:03
Message
#4
|
Indicatif : BS-21 Messages : 1,898 Inscrit : 21/06/11 Lieu : Magnanville Membre n° 3,827 |
postal essai ça, edit ton fichier Network.lua qui se trouve dans C:\Users\%user%\Saved Games\DCS\Config
et change la ligne : allow_object_export = False, en allow_object_export = true, (ça doit être fait au moins par celui qui héberge) a par ça je ne vois pas ce qui peu l’empêcher de tourner en multi |
gillesdrone |
7 May 2014, 09:06
Message
#5
|
Messages : 6,185 Inscrit : 24/03/07 Lieu : Sendets 64320 Membre n° 1,668 |
postal essai ça, edit ton fichier Network.lua qui se trouve dans C:\Users\%user%\Saved Games\DCS\Config et change la ligne : allow_object_export = False, en allow_object_export = true, (ça doit être fait au moins par celui qui héberge) a par ça je ne vois pas ce qui peu l’empêcher de tourner en multi c'est Network.cfg et non Network.lua --------------------
http://gilles.guesnel.free.fr ma chaine  menacer l' Ours dans son repère, l' Aigle pourrait y laisser quelques plumes |
Postal2 |
7 May 2014, 10:00
Message
#6
|
EXTREMEeeeeeeee!!!!!!!!!! Indicatif : TH-41 Messages : 6,152 Inscrit : 6/12/04 Lieu : A coter de dijon LFSD (21) Membre n° 20 |
Oki merki je testerai ça tout à l'heure .
--------------------
Extrêmmmmmmmmmmmmmmmmmmmmmmmmmeeeeeeeeeeee!!! |
Boulling |
7 May 2014, 11:51
Message
#7
|
Indicatif : FX-04 Messages : 1,044 Inscrit : 27/04/14 Lieu : Nantes Membre n° 4,087 |
postal essai ça, edit ton fichier Network.lua qui se trouve dans C:\Users\%user%\Saved Games\DCS\Config et change la ligne : allow_object_export = False, en allow_object_export = true, Pour ma part, le tips ne fonctionne pas. DCS change la variable en false à chaque démarrage. Comment le programme récupère les infos? EDIT:Correction la variable ne change plus mais toujours pas de connexion. Ce message a été modifié par boulling - 7 May 2014, 11:52. --------------------
|
Harke |
7 May 2014, 12:35
Message
#8
|
Indicatif : BS-21 Messages : 1,898 Inscrit : 21/06/11 Lieu : Magnanville Membre n° 3,827 |
moi testé et fonctionnel... je rapelle que ce doit être le serveur qui doit avoir ce paramètre (ou soit même si on héberge), si tu vas sur un serveur publique qui a laisser en "false", ça ne marchera pas !
et merci gille pour la correction, effectivement, c'est un .cfg Ce message a été modifié par Harke - 7 May 2014, 12:38. |
lamule |
7 May 2014, 14:12
Message
#9
|
Caféinoman Indicatif : TH-44 Messages : 1,688 Inscrit : 19/11/08 Lieu : France, lot et garonne, agen, 47 Membre n° 3,203 |
Si le dossier Scripts n'est pas créé le soft n installera pas ces fichiers d'export
--------------------
|
Cougar |
11 May 2014, 12:36
Message
#10
|
Messages : 74 Inscrit : 15/09/07 Lieu : BA118 Mont de Marsan Membre n° 2,385 |
Très sympa en effet , je l'utilise pour l'affichage de mon MFD droit sur mon homecockpit .
par contre , est ce que quelqu'un a réussi a redimensionner le MFD ? impossible de faire changer la taille pour lui faire remplir tout mon écran :X --------------------
www.vfa-lan.fr |
Haut de page · Retour à l'accueil · Contacter le Webmestre | Nous sommes le : 22/09/24 - 22:17 |