Accueil
Accueil

Bienvenue invité ( Connexion | Inscription )

2 Pages V < 1 2  
Reply to this topicStart new topic
> HELP
Side
post 18 Feb 2007, 18:58
Message #11




279th naval power

Messages : 835
Inscrit : 3/12/04
Membre n° 13

si je te verse une partie des bénéfices que je me suis fait sur ton dos et celui de kerdou tu penses que tu vas pouvoir y arriver?
jesors.gif

--------------------
Image IPB

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Collins
post 18 Feb 2007, 19:28
Message #12



 


Messages : 206
Inscrit : 11/11/06
Lieu : Fribourg / Suisse
Membre n° 833

Tout de suite ca devient intéressant ^^

Nan plus sérieusement la je vais pas avoir le temps, j'arrive à la fin du semestre et je suis débordé de taff.

--------------------

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
coolhands
post 18 Feb 2007, 20:17
Message #13






Messages : 575
Inscrit : 17/12/04
Lieu : Metz
Membre n° 39

Moi ce qui m'interesse c'est de savoir comment je dois procédé clairement apres je vais bossé et trouvé comment faire enfin peut etre saianlol.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Kerdou
post 19 Feb 2007, 13:35
Message #14






Messages : 802
Inscrit : 18/09/06
Lieu : Nantes
Membre n° 745

CITATION(Side @ 18 Feb 2007, 18:58) *

si je te verse une partie des bénéfices que je me suis fait sur ton dos et celui de kerdou tu penses que tu vas pouvoir y arriver?
jesors.gif


Je sens qu'on va plutot les réinvestir dans un énorme gode en fonte pour ton plus grand plaisir jesors.gif

A bas le racket capitaliste! russieflag.gif

Ce message a été modifié par kerdougan - 19 Feb 2007, 13:51.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Tarochi
post 21 Feb 2007, 23:42
Message #15



 


Messages : 110
Inscrit : 31/12/06
Membre n° 1,234

Coolhands, tu as deja une programme qui comunique la memoire partage du Falcon avec SIOC

il se apelle FAST.

Falcon n'y a pas aucune logiciel pour la exportation du dones, au memme temps tu peuves lire la memoire partage mais tu ne peuves le modifier, parce que Falcon seulement peuve se comander avec touches du clavier.

Nous avons dans SIOC le emulatork, qui c'est une emulateur du clavier, qui est integre dans le protocole IOCP.

Fast permetre le exportation du toutes les indicateur du cockpit du falcon( encore est en developement) via IOCP a SIOC, et puis avec le emulateur du clavier tu peuves faire tes compositions.

tu peuves avec les iocards et le link a le emulateur, faire tes conections pour les poussoirs et interrupteures, et avec fast tu peuves voir les resultats dans la memoire partage et tu peuves montrer le result de ton action dans ton cockpit.

Comme j'avait dit a Marauder, j'ai cherche quelques choses interesants, dans les forums du Opencockpits, je ne les ai teste, parce que moi n'y ai Falcon tongue.gif ,

mais je te peuve les comenter.



Tarochi

Ce message a été modifié par Tarochi - 21 Feb 2007, 23:54.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Tarochi
post 22 Feb 2007, 00:16
Message #16



 


Messages : 110
Inscrit : 31/12/06
Membre n° 1,234

* Disclaimer *
*****************
FAST is provided "as is" and actually is still a Beta-version. Use it on your own risk! ;-)
A big thanks to Alex "Skorp" García for the Spanish translation of this document!
*****************
* Installation *
*****************
To install FAST, simply start the setup.exe and tell the installer where to put the FAST files.
Since it is completely written in VisualBasic6, some files of the VB6Runtime are required to run FAST. These
files are included in the setup and will be installed automatically (for more details see install.txt)
*****************
* Configuration *
*****************
FAST is either configured through the config file fast.cfg or through the GUI (but changes in the GUI are not
automatically written to the config file)
A typical config file looks like this:
SIOCServer=192.168.1.1
SIOCPort=8092
DataModel=AF
F4Timer=30
Here's a short description of the fields in the config file (and GUI):
SIOCServer: the IP address of the machine where the SIOC server is running
SIOCPort: the port SIOC is listening (usually 8092)
F4Timer: intervall to poll Falcon data in milliseconds
DataModel: version of Falcon to connect to: AF for AlliedForce, BMS for BMS
*****************
* Overview *
*****************
FAST is a Tool to send Data from Falcon (either AlliedForce or any BMS derivate) to a SIOC server. Data is
send over TCP/IP through the IOCProtocol.
*****************
* Starting FAST *
*****************
When starting up, FAST reads the config file fast.cfg to get the needed parameters and then tries to connect
to Falcon and SIOC according to the values set in the config file. When the SIOC server is not running, FAST
does not automatically try to reconnect - you will have to connect by pressing the "connect" button.
When Falcon is not running, FAST will poll for Falcon in the interval given in the "F4Timer" field.
So the best starting order for FAST to work best is:
1.) start SIOC server software
2.) start FAST
3.) start Falcon
**********************
* SIOC configuration *
**********************
When you start SIOC, you can go to IOCPCONSOLE and open the file iocp_config.con - all SIOC variables
used are labeled now. Since the IOCProtocol can only transport integer values, you will have to modify the
values in SIOC (i.e. the mach value 86 would have to be divided by 100 to get the correct value of 0.86)
Once you look at the values in IOCPCONSOLE you will see, how to manipulate the values.
FAST uses the following SIOC variables (comments in brackets):
VAR 0001 - internal bits (not implemented yet)
VAR 0010 - Caution Panel Lights
The following bits are used:
FLCSFAULT = 0
ENGINEFAULT = 1
AVIONICSFAULT = 2
SEATNOTARMED = 3
ELECSYS = 4
SEC = 5
EQUIPHOT = 6 (is not in Memory, using CautionPanel OVERHEAT also)
NWSFAIL = 7
PROBEHEAT = 8
FUELOILHOT = 9
RADARALT = 10
ANTISKID = 11
CADC = 12 (is not in Memory, will always be OFF)
INLETICING = 13 (is not in Memory, will always be OFF)
IFF = 14
HOOK = 15
STORESCONFIG = 16
OVERHEAT = 17
NUCLEAR = 18 (is not in Memory, will always be OFF)
OXY_LOW = 19
ATFNOTENGAGED = 20 (is not in Memory, will always be OFF)
EEC = 21 (is not in Memory, using ECM[not on real CP])
CABINPRESS = 22
FWDFUELLOW = 23
AFTFUELLOW = 24
BUC = 25
VAR 0011 - Front Panel Lights
The following bits are used:
' lefteyebrowlights
MASTERCAUTION = 0
TFFAIL = 1
' left indexer
AOAHIGH = 2
AOAMIDDLE = 3
AOALOW = 4
' right indexer
RDY = 5
ARNWS = 6
DISC = 7
' right eyebrowlights
ENGFIRE = 8
ENGINE = 9 (is not in Memory, using CautionPanel EngineFault)
HYDOILPRESS = 10
FLCS = 11 (is not in Memory, using CautionPanel FltCtrlSys)
DBUON = 12 (is not in Memory, using DUAL->in AF on CP)
TOLDGCONFIG = 13
CANOPY = 14
OXYLOW = 15
' tws prime
HANDOFF = 16
LAUNCH = 17
PRIMODE = 18
NAVAL = 19
UNKNOWN = 20
TGTSEP = 21
' misc panel
ECMON = 22
TFRACTIVE = 23
TFRSTDBY = 24 (not available in AF)
VAR 0012 - Console Lights
The following bits are used:
JFSON = 0
AVTRON = 1
' epu
EPUON = 2
HYDRAZIN = 3
AIR = 4
' elec
FLCSPMG = 5
MAINGEN = 6
STBYGEN = 7
EPUGEN = 8
EPUPMG = 9
TOFLCS = 10
FLCSRLY = 11
BATFAIL = 12
' flight control
FLTCTRLFAIL = 13
' marcer beacon light(s)
MARKER_OUTER = 14
MARKER_MIDDLE = 15
MARKER_INNER = 16
NOSEWHEEL = 17
LEFTWHEEL = 18
RIGHTWHEEL = 19
GEARHANDLE = 20
' tws aux
AUXSRCH = 21
AUXACT = 22
AUXLOW = 23
AUXPWR = 24
CMDS_NOGO = 25 (NOGO will be set, when chaffCount or flareCount = 0)
CMDS_GO = 26
CMDS_DISPRDY = 27
VAR 0013 - Instrument Flags (not implemented yet)
The following bits are used:
HSI_To = 0 ' HSI_FLAG_TO_TRUE
HSI_Ils = 1 ' HSI_FLAG_ILS_WARN
HSI_Course = 2 ' HSI_FLAG_CRS_WARN
HSI_Init = 3 ' HSI_FLAG_INIT
TotalFlags = 4 ' HSI_FLAG_TOTAL_FLAGS
ADI_OFF = 5 ' ADI OFF Flag
ADI_AUX = 6 ' ADI AUX Flag
ADI_GS = 7 ' ADI GS FLAG
ADI_LOC = 8 ' ADI LOC FLAG
HSI_OFF = 9 ' HSI OFF Flag
BUP_ADI_OFF = 10 ' Backup ADI Off Flag
VVI_OFF = 11 ' VVI OFF Flag
AOA_OFF = 12 ' AOA OFF Flag
To check any of these bits, use the "TESTBIT" function of SIOC. If you want to check, if the NWS light is on
in Falcon, use:
C0 = TESTBIT V0011, 6
ATTENTION! Bits start with "0"!
so, to check the MasterCaution, you have to use
C0 = TESTBIT V0011, 0
VAR 0015-0018
are the original Falcon lightbit values. You can use these or the variables I implemented above.
To get more information about these values, please check the file IOCP.pdf which comes with FAST, it's
from "MachoMan's" supertron program. There are some differences between the AF lightbits and the BMS
lightbits (shown in IOCP.pdf):
● in lightbits the bits "WOW", "AutoPilotOn" and "TFR_STBY" are not available
● in lightbits2 the last bit "ENGINE" is not available
● in lightbits3 the bit "Power_Off" is not there, instead it is called "OnGround" - sadly, this bit doesn't
really indicate, if the plane is on the ground, just the time from rampstart to main generator running
● in lightbits3 all the bits from "Eng2_Fire" to "RightGearDown" are not in AF
VAR 0020-0099
Data values out of Falcon - to know, which value is what, please check the IOCPConsole with the included
iocp_config.con file. At the moment, only values from 20-70 are used, so there are some free spots for future
data...
### DED and PFL ###
Since SIOC does not support text to be transported, DED and PFL data is stored as 1 character ASCII-value
in 1 sioc variable, starting at variable 100.
So VARS 0100 - 0124 hold the characters for the first DED line, 0125-0149 for the 2nd DED line, 0150-0174
the 3rd DED line, 0175-0199 the 4th DED line and 0200-0224 the 5th DED line.
The PFL starts at VAR 0300 and ends at 0424.
The inverted character positions are not implemented yet
*****************
* Known Bugs *
*****************
● Some values are not read correctly from Falcon: fwd and aft fuel
● Inverted characters of DED and PFL are not implemented yet
*****************
* Changelog *
*****************
V0.94
*) Wheel-Lights changed for AF 1.09
V0.93
*) GearLights are updated, dependend on AF gear position values
*) Support for BMS/FF implemented
*) TFRSTDBY lightbit included (not available in AF)
*) variables “courseState” and “headingState” added (variables 69 and 70)
*) Bits in ConsoleLights added: NOGO, GO, DISPENSE RDY from CMDS panel
*) Bugfix – STORESCONFIG is available now
V0.92
*) own light values added
V0.91
First release
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
coolhands
post 22 Feb 2007, 09:16
Message #17






Messages : 575
Inscrit : 17/12/04
Lieu : Metz
Membre n° 39

Merci tarochi check mp. wink.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

2 Pages V < 1 2
Reply to this topicStart new topic
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
 

Haut de page · Retour à l'accueil · Contacter le Webmestre Nous sommes le : 28/03/24 - 16:52